Makita BO5040 Instruction Manual
Random orbit sander
Hide thumbs
Also See for BO5040:
- Instruction manual (49 pages) ,
- Instructions manual (12 pages) ,
- Technical information (9 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita BO5040
Summary of Contents for Makita BO5040
- Page 1 INSTRUCTION MANUAL Random Orbit Sander BO5040 BO5041 010741 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
AC supply. They are double-insulated in accordance with European Standard Makita Corporation responsible and can, therefore, also be used from sockets without manufacturer declare that the following Makita earth wire. machine(s): ENG102-3 Designation of Machine: Noise... -
Page 3: General Power Tool Safety Warnings
Do not abuse the cord. Never use the cord for representative in Europe who is: carrying, pulling or unplugging the power tool. Makita International Europe Ltd, Keep cord away from heat, oil, sharp edges or Michigan, Drive, Tongwell, moving parts. Damaged or entangled cords Milton Keynes, MK15 8JD, England increase the risk of electric shock. -
Page 4: Sander Safety Warnings
Power tool use and care Ventilate your work area adequately when you 18. Do not force the power tool. Use the correct perform sanding operations. power tool for your application. The correct Some material contains chemicals which may power tool will do the job better and safer at the be toxic. - Page 5 Open the grip base, and attach it to the sander in the and 12,000 orbit per minute by turning the adjusting dial. area of the Makita logo. Higher speed is obtained when the dial is turned in the 1. Grip base direction of number 5;...
- Page 6 1. Claws 2. Upper part 010746 Install the dust bag on the tool so that the Makita logo on the dust bag will be upright (not upside down). Emptying dust bag 1. Dust nozzle 003743 Then press the upper part of the front fixing cardboard in arrow direction to hook it onto the claws.
-
Page 7: Sanding Operation
Polishing operation For BO5041 only CAUTION: 009092 Use only a Makita genuine sponge pad, felt pad or Remove the dust nozzle by pushing the two latches. • wool pad (optional accessories). Always operate the tool at low speed to prevent •... -
Page 8: Maintenance
Only use accessory or 1. Felt pad attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Hook-and-loop type abrasive discs (with • pre-punched holes) Hook-and-loop type sponge pad •... - Page 12 Makita Corporation Anjo, Aichi, Japan 884946-222...