Table of Contents
Advertisement
Setting Surface Controls (cant'd)
Sabbath
Feature Mode
When the Sabbath
feature
is ON_ the timer display
show "Sb'and
all electronic
surface element
control
displays show "HE". The surface
elements
can
be
used
even
if
the Sabbath
Feature is on.
To activate
the Sabbath Feature Mode:
[IMER
In order to enter Sabbath
at least one radiant
burner has to be active.
The user has to activate
the
A
and the c;_!_olv__
(lock) pad at the same time for a few seconds. Timer display
will show "Sb" and element
(timer
slew)
pad
up
displays
will show "HE".
Look
To modify
a Surface
Element
power
when
the Sabbath
Feature
is active:
When
necessary
r it is possible
to adjust
the power
of the surface
element
but you have
to remember
that
the surface
element
control
will
adjust
the temperature
with
a 15-30
seconds
delay.
Note:
No element
size change
is allowed
during
Sabbath.
If
needed_
it has to be changed
prior
to Sabbath
entry.
To turn OFF the Surface Element when
the Sabbath
Feature is active:
ON
To shut off the surface
element while the Sabbath
feature
is ON, proceed
as usual (press the
key pad) but take note
that the ........
element
will immediately
turn off.
%N..........
Note:
keys
can
be
used
to turn Off any element. (,'_ key will turn off all elements.
Paw
To deactivate
the Sabbath
Feature Mode:
Touch and hold
A
(timer up slew) pad and the Co,_d(loci<) pad at the same time for a few seconds. "Sb" wii] disappear
Loc<
from the timer display
and "Hi:" will disappear
from the element
control
displays
except if it is still hot. The cooktop
is now
in its normal
operation
mode.
If a power failure happens when
Sabbath mode is active:
The unit wakes up in Ready mode with all displays
lit. "SF" (Sabbath
Failure) will be displayed
on the timer display
and "HE"
TJM/_
in the element
displays.
To get out of Sabbath
mode after the power failure, press the
(timer up slew) pad and the
_
Con'rrol
(lock) pad.
Lo0k
Warm & Hold Feature
The Warm
& Hold feature
may be used with any of the Cooking
Elements.
To Turn the Warm & Hold Feature ON:
/' ON
1.
To select the Warm
& Hold feature
for any Cooking
Element touch the 0_:[ key pad for the corresponding
Cooking
Element.
2.
Touch the We..... key pad located
in the main control
area. The associated
display
will show LH (low heat) indicating
& Hold
that the Cooking
Element is properly
set to Warm
& Hold. If no other key pads are pressed the control
will activate
the
desired Cooking
Element at the Warm
& Hold setting.
Locking the controls
The Cooktop
Controls can be locked in order to prevent the cooktop
from accidentally
being turned ON. This feature
can be
activated
only when no cooking
zone is active. If the cooktop
is in use° it will not be possible
to lock the controls.
To Turn ON the Controls Lock Feature:
Touch and hold the Central key pad. After a few seconds a beep will sound. The Loci< Indicator Light above the Co_,_ol key pad will turn
Lo
k
.L ck
ON indicating the co_]_top is locked. This will keep any Cooking Element or Cooktop functions from being aca_entally
turned ON.
Note: If the cooktop
is in used when the Control
Loci< Feature is activated°
the command
will be ignored.
To Turn OFF the Controls Lock Feature:
Touch and hold the Court,el key pad. After a few seconds a beep will sound. The Lock Indicator
Light above the Co_t_d k ey pad
. _.
.Lock
may now be
will turn OFF indicating
the cooktop
is unlocked.
The Cooking
Elements or any of the other Cooktop
functions
o,_k
used.
12
Advertisement
Table of Contents
