Table of Contents
Advertisement
Setting Surface Controk (cant'd)
Using the Touch Control
Be sure that your finger is placed
in the center of the touch pad. If the finger is not placed
on the center of a pad, the cooktop
may not respond to the selection
made.
Lightly contact
the pad with the fiat part of your entire fingertip.
Do not just use the narrow
end of your fingertip.
LED Messages
or Light Indicators
Displayed
by Main Control
Control
CONTROLS
LOCK- This feature
allows the cooktop
to be locked when no cooking
zones are
Lock
active.
If the cooktop
is in use, it will not be possible to lock the controls.
Touch and hold
Fig. 1
the LOCI< key pad for few seconds. A beep will sound and the Loci< indicator light will glow
[Fig. 2). Once locked
no Cooking
Zones will activate.
To turn the Controls Loci< OFF, touch
and hold the LOCI< key pad for few seconds. A beep will sound, the Loci< indicator light will
turn OFF [Fig. 1) and the cooktop
may be used normally.
Contro_
Lock
Fig. 2
COOKTOP
POWER - The Cooktop
POWER key pad activates
the entire Cooktop.
To power
the cooktop,
touch and hold the POWER key pad. A beep will sound and the Power LED will
glow (See Fig. 4). The cooktop
will be in a ready mode. If no other key pads are touched
the
Cooktop
Main POWER will turn OFF automatically.
To turn the Main
Power OFF, touch and
hold the Main
POWER key pad. A beep will sound and the Power Indicator
Light will turn
OFF (See Fig. 3).
Fig. 5
Fig. 6
ERROR CODES EO XX- The element
power level displays
can show error codes. When this happen,
two displays
are used
to show the error code in format
"E0" "XX" where XX indicates
the error code (Figs. 5 & 6). If this happen,
please refer to
section "Before you call" in this manual.
POWER ON
POWER ON
Fig. 3
Fig. 4
LED Messages
or Light Indicators
Displayed
by Cooking Element Controls
COOKING
ZONE ON/OFF
PAD= Each Cooking
Element has separate
ON/OFF
key pads. Once the Main
Power key pad
has been touched
to activate
the cooktop,
touch the corresponding
Cooking
Element ON/OFF
key pad once to active the
/\
Lo
Cooking
Zone
needed.
"- -" will
appear
in the LED display.
If the
corresponding
H
(increase)
/
_/
(decrease)
key
pad
is
not touched,
the request to turn the Cooking
Element ON will cancel
and the Cooktop
Main
Power will turn OFF:. To set a
P .....
Lo
Cooking
Element power level touch the corresponding
Cooking
Element
Hi (increase)
or v (decrease)
key pad once. To turn
OFF a Cooking
Element, touch the Cooking
Element ON/OFF
key pad once. The Cooking
Element Indicator
Light will turn
OFF.
Advertisement
Table of Contents
