NordicTrack C 2300 User Manual page 20

HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the LINE OUT jack on your
stereo.
A
i@ [] Audio
i@Q] Cable
........... J==..
a
Adapter --_
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA Y-adapter (available
at electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
RCA Y-adapter. Plug the RCA Y-adapter into the
LINE OUT jack on your stereo.
B
@ [] Audio
RCA
Y-adapter
r_m ("o'_i Cable Adapter
Wire removed from
LINE OUT jack
Note: If your computer has a 3.5ram LINE OUT jack,
see instruction A. if your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your computer.
A
_u
._ UNEOUT
a
j
i@ []i Audio
"'",'2"2"2"2"2"2"..
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your computer. Plug your
headphones or speakers into the other side of the
Y-adapter.
B
i@ []i Audio
i..!!0N!!....¢.]
3.5ram __
in.r_-n("_ i Cable -- Y-adapter
Headphones/Speakers
2O