Connect Wires - Honeywell RTH2510 Quick Installation Manual

Connect Wires

Conventional Systems (Typical Wiring)
1) Match each labeled wire with the terminal having
the same letter.
2) Loosen the terminal screws using a screwdriver,
insert the wires, then tighten the screws.
3) Push any excess wire back into the wall opening.
• Labels don't match? See page 6.
• Have a heat pump with auxiliary/backup heat, see pages 7-8.
• Call 1-800-468-1502 for wiring assistance.
Programmable Thermostat RTH2510
5
5.