Honeywell RTH2510 Quick Installation Manual page 15

System Setup (cont'd)
Function
Temperature
1
display format
2 Time display format
Heating cycles per
3
hour
Compressor
4
protection
Adaptive Intelligent
5
Recovery
6 System setup
1
Damage can occur if the compressor is restarted too soon after
shutdown. This feature forces the compressor to wait 5 minutes before
restarting. During the wait time, the message Cool On or Heat On
flashes on the screen. When the safe wait time has elapsed, the
message stops flashing and the compressor turns on.
2
Adaptive Intelligent Recovery
long your furnace or air conditioner takes to reach the set
temperature. Simply program the desired times and desired
temperatures into the schedule. The thermostat will determine when
to activate heating or cooling so that the desired temperature is
attained at the desired time.
Default
setting
1
2
Programmable Thermostat RTH2510
0: Fahrenheit
0
1: Celsius
0: 12-hour display
0
1: 24-hour display
2 to 6 cycles per hour
• 2: 30 min (steam, gravity)
• 3: 20 min (hot water, 90%+
5 high-efficiency furnace)
• 4: 15 min (gas or oil)
• 5: 12 min (gas or oil)
• 6: 10 min (electric)
0: Off
1
1: On
0: Off
1
1: On
0: Conventional system (1H1C)
0 1: Heat pump system with
auxiliary/backup heat (2H1C)
TM
allows the thermostat to "learn" how
13
Options
13.