Table of Contents
Advertisement
Available languages
Available languages
Connect Wires
Conventional Systems (Typical Wiring)
1)
Match each labeled wire with the terminal having
the same letter.
2)
Loosen the terminal screws using a screwdriver,
insert the wires, then tighten the screws.
3)
Push any excess wire back into the wall opening.
• Labels don't match? See page 6.
• Have a heat pump with auxiliary/backup heat, see pages 7-8.
• Call 1-800-468-1502 for wiring assistance.
Programmable Thermostat RTH2410
5
5.
Advertisement
Table of Contents
