Husqvarna WR 250 2013 Owner's Manual page 47

It is necessary ABSOLUTELY TO AVOID THAT
HIGH PRESSURE JETS OF WATER OR AIR come
to contact with THE ELECTRICAL PARTS, espe-
cially the electronic control unit (1) and the
dashboard (2).
1
EN - 46 SPECIFICATIONS - OPERATION - MAINTENANCE
After washing:
- lubricate the points listed in the Maintenance Table (Appendix A).
- Start the engine and run it for 5 minutes.
- Test the brakes before riding the motorcycle.
WARNING*: Never wax or lubricate the brake
disc. Loss of braking and an accident could
result. Clean the disc with an oilless solvent
such ans acetone. Observe the solvent warn-
ings.
2
After each cleaning, it is recommended the
use of a water-repellent product suitable for
electrical contacts (see table for lubrications
and supplies) on all the electrical contacts,
without disconnect them.