Grt Software: Functionality Configuration - Siemens SXG 75 Service Manual

8

GRT Software: Functionality Configuration

Note: Not implemented in GRT Version 3.x. For Software Update please use the tool
3GSWUP_FU. Manual and Software are available in the Technical Support section of
the C-market.
Select „Settings >> SWUP / JPICS"
Sep 1:
Proceed as follows
Step 2:
Technical Documentation
TD_Repair_L1-L3_SXG75_R1.1.pdf
:
Select all required Variants you need to repair (click onto the "+" in
front of the product name.
Check Com-Port setting. If necessary change it
Check speed setting. Select always the lowest speed if your PC
does not have a fast serial card
Enter the value for "JPICS Server Timeout". Be careful, this value
defines how long GRT tries to reach the server until you get an
error message. Do not select a very long time
Company Confidential
2005©BenQ
2
3
4
1
Release 1.1
11/2005
Page 28 of 61