Table of Contents
Advertisement
8
GRT Software: Functionality Configuration
Select „Settings >> SWUP / JPICS"
Step 1:
Proceed as follows
Step 2:
Technical Documentation
TD_Repair_L1-L3_AX72_R1.1.pdf
:
Select all required Variants you need to repair (click onto the "+" in
front of the product name.
Check Com-Port setting. If necessary change it
Check speed setting. Select always the lowest speed if your PC
does not have a fast serial card
Enter the value for "JPICS Server Timeout". Be careful, this value
defines how long GRT tries to reach the server until you get an
error message. Do not select a very long time
Company Confidential
2006©BenQ
2
3
4
1
Release 1.1
01/2006
Page 14 of 41
Advertisement
Table of Contents
