Removing/Assembling The Freezer Drawer Handle; Removing/Assembling The Doors And Drawers - LG GF24BG Series Owner's Manual

13 INSTALLATION
Removing/Assembling fhe
Freezer Drawer Handle
Removing/Assembling fhe
Doors and Drawers
Removing the Handle
1
Loosen the set screws D located on the
lower side of the handle with a 1/8 in. (3.1 mm)
Allen wrench and remove the handle.
2
Loosen the mounting fasteners D that
connect to the
freezer drawer
and handle
using a 1/4 in.
(6.35 mm)
Allen wrench,
and remove
the mounting
fasteners.
Assembling the Handle
2
Assemble the mounting fasteners _ at
both ends ofthe handle using a 1/4 in. Allen
(6.35 mm) wrench.
Place the handle on the door by fitting the
handle
footprints over
the mounting
fasteners and
tightening the
set screws
with a 1/8in.
(3.1 mm)
Allen wrench.
WARN ING
When assembling or disassembling the
handle:
• Grasp the handle tightly to avoid drop-
ping it.
Do not swing the handle into nearby
people or animals.
Make sure that the bracket hole of the
handle fits properly into the stopper
bolt of the door. Assemble the set
screws to fix the handle into place.
Make sure that there is not a gap
between the door and handle after
assembling the handle.
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
is the recommended procedure.
WARN ING
If your entrance door is too narrow
for the refrigerator to pass through,
remove the refrigerator doors and move
the refrigerator sid eways through the
doorway.
Use two or more people to remove and
install the refrigerator doors. Failure to
do so can result in back or other injury.
Disconnect the electrical supply to the
refrigerator before installation. Failure
to do so could result in serious injury or
death.
Do not put hands, feet or other objects
into the air vents or bottom of the
refrigerator. You may be injured or
receive an electrical shock.
Be careful when handling the hinge and
stopper.You may be injured.
Remove food and bins before detaching
the doors and drawers.