Table of Contents
Advertisement
HOW
TO USE
26
HOWTO
Before
use
USE
Clean
the
refrigerator.
Clean your refrigerator
thoroughly
and wipe off all dust that accumulated
during
shipping.
CAUTION
• Do not scratch the refrigerator
with a sharp object or use a detergent that
contains
alcohol, a flammable
liquid or an abrasive when removing
any
tape or adhesive from the refrigerator,.
• Do not peel off the model
or serial
number
label
or the technical
information
on the rear surface of the refrigerator.
NOTE
Remove adhesive residue by wiping it offwith
your thumb or dish detergent.
']
Connect
the
power
supply.
Check if the power supply is connected
before use.
Read the"Turning
OnThe Power" section.
Turn
off
the
icemaker
if the
refrigerator
is not
yet
connected
to
the
wafer
supply.
Turn offthe
automatic icemaker and then plug the power plug of the refrigerator
into the grounded
electric outlet.
_This is applicable
only to certain models.
CAUTION
--'I
Running the automatic
icemaker before connecting
it to the water supply
J
may cause the refrigerator
to malfunction.
Waif
for
the
refrigerator
fo cool.
Allow your refrigerator
to run for at least two to three hours before putting food
in it. Check the flow of cold air in the freezer compartment
to ensure proper
cooling.
CAUTION
The
refrigerator
makes
a loud
noise
after
initial
operation.
This is normal.The volume will decrease as the temperature
lowers.
Open
refrigerator
doors
and freezer
drawers
to ventilate
the
inferior.
The inside of the refrigerator
may smell like plastic at first. Remove any adhesive
tape from inside the refrigerator
and open the refrigerator
doors and the freezer
drawers for ventilation.
Advertisement
Table of Contents
