Functional Description - Makita HR2400 Instruction Manual

FUNCTIONAL
DESCRIPTION
1
2
1. Switch trigger
2. Lock lever
1
1. Reversing switch
6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
003106
CAUTION:
• Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
• Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To start the tool, simply pull the switch trigger. Tool speed is
increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then
slide the lock lever upward.
To stop the tool from the locked position, pull the switch trig-
ger fully, then release it.
Reversing switch action
003114
This tool has a reversing switch to change the direction of
rotation. Press the upper side (FWD side) of the reversing
switch for clockwise rotation or the lower side (REV side) of
the reversing switch for counterclockwise rotation.
CAUTION:
• Always check the direction of rotation before operation.
• Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.