1. Manuals
  2. Brands
  3. Makita Manuals
  4. Rotary Hammer
  5. HR2432
  6. Instruction manual

Makita HR2432 Instruction Manual

Rotary hammer with dust extraction
Hide thumbs Also See for HR2432:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
Rotary Hammer With Dust
Extraction
HR2432
005873
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita HR2432

Summary of Contents for Makita HR2432

  • Page 1 INSTRUCTION MANUAL Rotary Hammer With Dust Extraction HR2432 005873 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    ENGLISH SPECIFICATIONS Model HR2432 Tungsten-carbide tipped bit 24 mm Concrete Core bit 54 mm Capacities Diamond core bit 65 mm Steel 13 mm Wood 32 mm Max. drilling depth 100 mm (Adjusting depth) (0 - 100 mm) Dust extraction Max. bit diameter...

  • Page 3: General Power Tool Safety Warnings

    Makita Corporation responsible Electrical safety manufacturer declare that the following Makita Power tool plugs must match the outlet. Never machine(s): modify the plug in any way. Do not use any Designation of Machine: adapter plugs with earthed (grounded) power Rotary Hammer With Dust Extraction tools.

  • Page 4: Rotary Hammer Safety Warnings

    15. Do not overreach. Keep proper footing and 27. Keep handles dry, clean and free from oil and balance at all times. This enables better control grease. GEB007-7 of the power tool in unexpected situations. 16. Dress properly. Do not wear loose clothing or ROTARY HAMMER SAFETY jewellery.

  • Page 5: Functional Description

    WARNING: CAUTION: DO NOT let comfort or familiarity with product Always check the direction of rotation before • (gained from repeated use) replace strict adherence operation. to safety rules for the subject product. MISUSE or Use the reversing switch only after the tool comes •...

  • Page 6: Torque Limiter

    For chipping, scaling or demolition operations, depress Bit grease (optional accessory) the lock button and rotate the action mode changing Coat the bit shank head beforehand with a small amount knob to the symbol. Use a bull point, cold chisel, of bit grease (about 0.5 - 1 g).
  • Page 7 Bit angle (when chipping, scaling or Dust extractor attachment and dust bag demolishing) (In concrete drilling operation) With the dust extractor attachment and the dust bag 1. Action mode installed on this tool, you can do your work very cleanly changing knob without dust scattered around in the work site.

  • Page 8: Depth Adjustment

    NOTE: 1. Clamping screw At some angles of the side grip with the tool, the • dust extractor attachment cannot be installed on the tool because of the interference between the attachment and the tool. Insert firmly the hose of the dust extractor attachment into the hose port of the tool until the hose hits against the bottom of the port to be fixed firmly to the tool.
  • Page 9 Cleaning out dust bag Do not force the tool. Light pressure gives best results. Keep the tool in position and prevent it from slipping 1. Fastener away from the hole. Do not apply more pressure when the hole becomes clogged with chips or particles. Instead, run the tool at an idle, then remove the bit partially from the hole.

  • Page 10: Maintenance

    If you need any assistance for more details regarding Set the action mode changing knob to the symbol. these accessories, ask your local Makita Service Center. You can drill up to 13 mm diameter in metal and up to 32 SDS-Plus Carbide-tipped bits •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan 884587C224...

Table of Contents