Mechanism Operation - Sanyo FISHER DVD-1500 Service Manual

MECHANISM OPERATION

1.How to setting the tray.
1. The GEAR 1 move from side to side.
2. Match the mark of GEAR 2 and mark of GEAR 3,
and then install the BOSS.
3. Turn the GEAR 1 counterclockwise, and then SLIDE
move right side.
2
1
SHASSIS
FRONT SIDE
MOTOR
6. Match the hole of GEAR 7 and hole of chassis while turning
GEAR 6.
7. Match the mark of LOADING GEAR 8 and gear of TRAY
where see horn hole 9 of tray.
8.Push a tray with the state that turned the entire surface of a
tray into approximately 5 degrees the lower part slowly.
3
2
MARKER
3
MARKER
4. Move the SLIDE left side.
5. Match the Hole of GEAR 5 and Hole of CHASSIS 4.
LARGE TOOTH
RIB
CHASSIS HOLE
TRAY
- 3 -
GREASE
EM-50L
RIB
GREASE
EM-50L
4
7
6
MARKER
MARKER
9
GREASE
EM-50L
GEAR HO
5
HOLE
8
LOARDING
GEAR