Whirlpool WTW8000DW0 Use And Care Manual page 7

Cycle Guide
Settings and options shown in bold are default settings for that cycle.
For best fabric care, choose the cycle that best fits the load being washed.
If using the Eco Monitor, adjust the temperature and spin speed within that cycle to improve energy usage.
Not all cycles and options are available on all models.
No clothes in
washer
Clean
Washer
with
affresh C_
Hot
Warm
Cool
Cold
Tap Cold
High Extra
Low Heavy
No Spin Heavy
Medium
Light
Soak
Heavily soiled
fabrics
Drain &
Spin
Rinse &
Spin
Hand-washed
garments or dripping
wet items
Swimsuits and items
requiring rinsing
without detergent
Hot No Spin
Warm
Cool
Cold
Tap Cold
N/A High
Low
No Spin
Tap Cold High
Low
No Spin
Use this cycle every 30 washes to keep the
inside of your washer fresh and clean. This
cycle uses a higher water level. Use with
affresh ® Washer Cleaner tablet or liquid
chlorine bleach to thoroughly clean the inside
of your washer. This cycle should not be
interrupted. See "Washer Care."
iMPORTANT: Do not place garments or other
items in the washer during the Clean Washer
with affresh® cycle. Use this cycle with an
empty wash tub.
Extra Use this cycle to soak small spots of set-in
Heavy stains on fabrics. After time has expired,
Heavy washer will drain, but will not spin and a
tone will sound. To set a follow-up cycle,
Medium
add additional detergent and select a cycle
Light based on fabric type.
N/A
N/A EcoBoost
TM
Fabric Softener
This cycle uses a spin to shorten drying
i times for heavy fabrics or special-care
items washed by hand. Use this cycle to
drain washer after cancelling a cycle or
completing a cycle after a power failure.
Combines a rinse and high speed spin for
loads requiring an additional rinse cycle or
i to complete a load after power interruption.
Also use for loads that require rinsing only.
* All rinses are cold.