Whirlpool WTW8000DW0 Use And Care Manual page 11

1 O, Select cycle options
c_ c_
II
Deep Delay
Clean Wash
c:D Loud
m Ill IR C23 C23Soft
Presoak Extra _ EcoBoost Fabric Cycle
Rinse Softener Signal
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Deep Clean or Extra Rinse. These can be
turned off, if desired.
NOTE: Not all options are available with all cycles.
fl 1, Press START/Pause/Unlock
to begin wash cycle
C_
START
Pause/Unlock
Press the START/Pause/Unlock button to start the wash
cycle. When the cycle has finished, the DONE indicator
will light and the cycle signal will sound (if set). Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and rusting of metal hooks, zippers,
and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock; the lid will unlock once the
washer movement has stopped. This may take several minutes
if the load was spinning at high speed. Then close lid and
press START/Pause/Unlock again to restart the cycle.
If lid is left open for more than 10 minutes, the water will
pump out automatically.
11