Control Panel Features - Kenmore 796.31412310 Use & Care Manual

I: [o_ _o_ _1_,_
WARNING:
To reduce the risk of fire, electric shock, or injury to persons, read and follow this
entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.
CONTROL PANEL FEATURES
O POWER (ON/OFF) BUTTON
Pressto turn the washer ON. Press again to turn
the washer OFF. Pressing the POWER button dur-
ing a cycle will cancel that cycle and any load
settings will be lost. The lid will unlock after a brief
pause.
NOTE: If the washer remains idle for four minutes
after turning the washer off:, any water left in
the tub will automatically be drained. An alarm
will sound one minute prior to draining, and 'dr'
will appear on the display. You may restart the
washer at this time. However, once the washer
initiates draining, all functions will be suspended
and cycle settings lost, and 'dr' will be displayed
until draining is complete.
O CYCLE SELECTOR BUTTON
Pressthe Cycle Button repeatedly until the desired cycle
is selected. Once the desired cycle has been selected,
the standard presets will appear in the display. These
settings can be adjusted using the cycle setting but-
tons anytime before starting the cycle.
O START/PAUSE BUTTON
Press this button to start the selected cycle.
If the washer is running, use this button to pause the
cycle without losing the current
settings.
NOTE: If you do not press the START/PAUSE button
within four minutes of selecting a cycle, the washer
automatically turns OFF. If the washer is paused
during a cycle for more than four minutes, the cycle
will be cancelled and any water remaining in the
tub will be drained. An alarm will sound at three
minutes to warn you that the tub is about to drain.
O CYCLE MODIFIER BUTTONS
Use these buttons to adjust the settings for the se-
lected cycle. The settings light up above the
buttons to show the current selection.
O SPECIAL CYCLE AND OPTION BUTTONS
These buttons allow your to select special cycles or
options.
O TIME AND STATUS DISPLAY
The display shows the cycle status and estimated
time remaining.
NOTE: To protect your clothing, not all settings are available on all cycle selections.
12