Dell Latitude E4300 Service Manual page 80

DC-In Power Assembly: Dell Latitude E4300 Service Manual
Back to Contents Page
DC-In Power Assembly
Dell™ Latitude™ E4300 Service Manual
Removing the DC-In Power Assembly
Replacing the DC-in Power Assembly
Removing the DC-In Power Assembly
CAUTION: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at: www.dell.com/regulatory_compliance.
1. Follow the instructions in
2. Remove the LED dashboard cover (see
3. Remove the keyboard (see
4. Remove the display assembly (see
5. Remove the palm rest (see
6. Remove the system fan (see
7. Remove the optical drive (see
8. Disconnect the smart card cable.
9. Disconnect the speaker assembly cable.
10. Disconnect the coin-cell battery from the system board (see
11. Remove the system board (see
the system board.
12. Disconnect the DC-in power assembly from the underside of the system board.
file:///C|/Biz%20Client/2015/Lola%20(Defect%20Fix)/dcpower.htm[5/25/2015 11:14:18 AM]
What You Need to Know For Your
Removing the LED Dashboard
Removing the Keyboard).
Removing the Display
Removing the Palm Rest).
Removing the System
Removing the Optical
Removing the System Board
Safety.
Cover).
Assembly).
Fan).
Drive).
Removing the Coin-Cell
Assembly); leave the DC-in power assembly attached to
Battery).