Removing The Smart Card - Dell Latitude E4300 Service Manual

Smart Card: Dell Latitude E4300 Service Manual
Back to Contents Page
Smart Card
Dell™ Latitude™ E4300 Service Manual

Removing the Smart Card

Replacing the Smart Card
Removing the Smart Card
CAUTION: Before working inside the computer, read the safety information that shipped with the
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at: www.dell.com/regulatory_compliance.
1. Complete the steps in
2. Remove the hard drive (see
3. Remove the display assembly (see
4. Remove the keyboard (see
5. Remove the palm rest assembly
6. Remove the four M2 x 3-mm screws that secure the card to the computer base.
7. Disconnect the card cable from the system board.
8. Lift the card from the system board.
1 smart card cable 2 M2 x 3-mm screw (4)
3 smart card
Replacing the Smart Card
NOTE:
This procedure assumes that you have completed the removal procedure first.
file:///C|/Biz%20Client/2015/Lola%20(Defect%20Fix)/express.htm[5/25/2015 11:14:13 AM]
What You Need to Know For Your
Removing the Hard
Removing the Display
Removing the Keyboard).
(Removing the Palm
Safety.
Drive).
Assembly).
Rest).