Kenmore 790.9740 Use & Care Manual page 13

Before Setting Oven Controls
The Glide Rack
The glide rack is an extendable rack that makes food prepara-
tion easier. It has glide tracks that allow the rack to be pulled
away from the oven without rubbing the sides of the oven wall.
Removing and replacing the glide racks
To remove the glide rack:
1. Lift up on the release lever located across the lower front of
the rack, as shown in Figure 8.
2. While holding up the release lever (Figure 9), pull the glide
rack out of the oven until the stop position is reached, use two
hands if necessary.
3. Using both hands, grasp the upper and lower portions of the
glide rack (Figure 10).
4. Lift up the front of the rack slightly and continue to pull the
rack away from the oven.
5. Be sure to grasp both upper and lower rack portions together
when removing or handling the glide rack. The rack portions
move independently and are difficult to handle unless held
together..
To replace the glide rack:
1. Grasp both upper and lower portions of the glide rack
(Figure 10).
2. Lift and hold the rack level between the oven cavity walls.
3. Tilt the front of the rack upward slightly and slide the rack
completely into position. Some force may be necessary to
make sure the oven rack has snapped into place.
Figure 8: Extendable glide rack with release lever in locked
position
Figure 10: Removing and replacing glide rack from oven
t
Figure 9: Glide rack with release rack in unlocked position
13