Recording Settings (Recording) - Sony RDR-HX720 Operating Instructions Manual

Recording Settings
(Recording)
The "Recording" setup allows you to adjust
recording settings.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Recording," and press
ENTER.
The "Recording" setup appears with the
following options. The default settings
are underlined.
HDD Rec. Settings
Bilingual Recording
Selects the sound to be recorded on the HDD.
Main
Sub
Main+Sub
b
Note
If you change the recording mode while dubbing
from a DVD to the HDD, the sound recorded in the
source (DVD) is applied regardless of this setting.
88
Records the main sound for
the bilingual programme.
Records the sub sound for the
bilingual programme.
Records the main and sub
sounds for the bilingual
programme.
HQ Setting
Selects the HQ mode used for recording on
the HDD (page 37).
HQ+ Records in higher quality
(approximate 15 Mbps).
HQ Records in the standard HQ
mode.
DVD Rec. Settings
Bilingual Recording (for all recordable
discs except DVD-RWs/DVD-Rs in VR mode)
Selects the sound to be recorded on the
recordable disc. This setting is not necessary
when recording on DVD-RWs/DVD-Rs (VR
mode) that record both the main and sub
sounds.
Main Records the main sound for
the bilingual programme.
Sub
Records the sub sound for the
bilingual programme.
Timer Settings
Rec Mode Adjust
On Automatically adjusts the
recording mode to enable the
entire programme to be
recorded (page 40).
Off
Turns off the function.
Auto Title Erase (HDD only)
On
Automatically erases old
titles recorded on the HDD
(page 40).
Off
Turns off the function.
Synchro Rec
Selects the recording destination used for
Synchro-Recording (page 46).
Record to Records to the HDD.
HDD
Record to
Records to DVDs.
DVD