Programming - Miele KM 6112 Operating And Installation Instructions

Programming

To call up the programming mode
To set a programme / status setting
To save settings
To not save settings
You can change the default settings of the programme
options (see chart). Several settings can be altered in
succession.
After the programming mode has been called up, P
(Programme), S (Status) and numbers will appear in the
cooking zone displays. These show the current settings.
Once you have left the programming mode, the hob will be
reset automatically. The process is completed when the
booster indicator lights up briefly.
Do not switch the hob on again until the reset process is
completed.
^ With the hob switched off, touch the s and B I/II sensors at
the same time until the relevant indicator lamp flashes.
^ Hobs with 4 or more cooking zones
Touch the sensor for selecting the front left cooking zone.
^ Hobs with 3 cooking zones
Touch the sensor for selecting the left cooking zone.
^ Touch the + or - sensor to set the required Programme.
^ Touch the sensor for the front right cooking zone.
^ Touch the + or - sensor to set the required Status setting
(see chart).
^ Touch the s sensor until all the displays go out.
^ Touch the B I/II sensor until all the displays go out.
Additional functions
47