Switching On - Miele KM 6112 Operating And Installation Instructions

Switching on

To switch the hob on
Switching on a cooking zone, setting a power level
Altering the power level
The hob must be switched on before any of the zones can be
used.
Do not leave the appliance unattended whilst it is being
used.
^ Touch the s sensor.
0 will appear in each of the cooking zone displays. 00 will
appear in the timer display. If no further entry is made, the
hob will switch itself off after a few seconds for safety
reasons.
^ Touch the sensor for selecting the cooking zone you want.
A 0 will flash in the cooking zone display.
^ Whilst the 0 is flashing, select a power level of between 1
and 9 by touching the - or + sensor.
To select cooking with Auto heat-up, press the - sensor
first (see "Auto heat-up"). To select cooking without Auto
heat-up, press the + sensor first.
The power level selected flashes in the display for a few
seconds to start with and then lights up constantly.
^ Touch the sensor for selecting the cooking zone you want.
The power level will flash.
^ Touch the + or - sensor to set the power level you want.
Operation
27