License Plate Lamp - GMC Yukon 2012 Owner's Manual

10-38 Vehicle Care
4. Press the release tab, if bulb
socket has one, and turn the
bulb socket counterclockwise to
remove it from the taillamp
assembly.
5. Pull the old bulb straight out
from the bulb socket.
6. Press a new bulb into the bulb
socket.
7. Reinstall the socket into the
taillamp assembly by turning the
bulb socket clockwise.
8. Reinstall the taillamp assembly
making sure to line up the pins
with the vehicle and tighten the
screws.

License Plate Lamp

1. Remove the two screws holding
each of the license plate lamps
to the molding that is part of the
liftgate.
I n f o r ma t i o n P r o v i d e d b y :
2. Twist and pull the license plate
lamp assembly forward through
the molding opening.
3. Remove the bulb socket from
the lamp assembly by turning it
counterclockwise.
4. Pull the bulb straight out of the
socket and install the new bulb.
5. Reverse Steps 1 through 3 to
reinstall the license plate lamp.