Third Row Seats - GMC Yukon 2012 Owner's Manual

3-16 Seats and Restraints
2. Lift the seatback and push it
rearward. Push and pull on the
seatback to make sure it is
locked.
WARNING
A safety belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. After raising the
rear seatback, always check to be
sure that the safety belts are
properly routed and attached, and
are not twisted.
3. For the 60/40 split-bench seat,
make sure the safety belt in the
center seating position is not
caught between the two seats
and is not twisted.

Third Row Seats

If the vehicle has a third row seat,
the seatback can be folded, and the
entire seat can be tumbled or
removed from the vehicle.
Folding the Seatback
To fold the seatback:
1. Open the liftgate to access the
controls for the seat.
2. Remove all items on the seat
cushion.
Notice: Folding a rear seat with
the safety belts still fastened may
cause damage to the seat or the
safety belts. Always unbuckle the
safety belts and return them to
their normal stowed position
before folding a rear seat.
I n f o r ma t i o n P r o v i d e d b y :
3. Lift the release lever 1, on the
bottom rear of the seatback on
the outboard side of the seat,
and the seatback folds forward.