Low Beam Bulb; Cover With Retaining Clamps; Installing A New Bulb - Volvo S40 2005 Owner's Manual

2005 Volvo S40

Low beam bulb

1. Open the hood.
2. Remove the headlight housing.
3. Press the retaining clamps to the sides.
4. Release the bulb's retaining spring by pressing it to the right, and then moving it outward and
downward.
5. Pull out the bulb.
6. Disconnect the wiring connector from the bulb.

Installing a new bulb.

1. Insert the new bulb. It can only be installed in one position.
pg. 157 Replacing front bulbs
2. Press the retaining spring upward and slightly to the left until it snaps into place.
3. Press the wiring connector onto the bulb.
4. Put the plastic cover in place.
http://new.volvocars.com/ownersdocs/2005/2005_S40/05s40_10b.htm (3 of 13)8/12/07 12:19 AM

Cover with retaining clamps

Low beam bulb