Removing The Board - Fujitsu FUTRO S900 Operating Manual

38 - English

Removing the board

Board,
► Open the casing (see
► Loosen the screw (1).
► Remove the board from the riser card (2).
You must reinstall the rear slot cover plate due to cooling, fire protection and the EMC
regulations (regulations on electromagnetic compatibility) to be complied with.
► Reinstall the rear slot cover plate by inserting it in the installation slot from
the inside and securing it with the screw.
► Close the casing (see
80
"Opening the casing", Page 20 -
"Closing the casing", Page 21 -
System expansions
English).
2
1
English).
Fujitsu Technology Solutions