Fujitsu FUTRO S900 Operating Manual page 70

24 - English
► Place the SmartCard reader on the carrier with the component side facing
downwards, in the direction of the arrow (1).
► Fasten the SmartCard reader onto the carrier with the screws (2).
► Connect the cable to the SmartCard reader (3) and to the connector on the mainboard (4).
► Reinstall the cross piece and the PCI or PCIe board if necessary (see
"Installing the board", Page 36 -
► Close the casing (see
Make sure that the cables are not trapped between the casing and the components.
66
English).
"Closing the casing", Page 21 -
System expansions
2
4
2
1
3
English).
Fujitsu Technology Solutions