Getting started
Setting up the device
In order to ensure that the casing is sufficiently ventilated and to prevent overheating,
the device must only be operated with the base foot attached.
If the device is to be built-in, adequate ventilation must be assured.
Fit the base feet for horizontal or vertical operation (see
Page 9 - English
Base feet for horizontal operation are available as an option.
Vertical operating position
Sidecover
Base feet
Operatingposition,vertical
Verticaloperatingposition
Use the supplied foot when the device is to be used in a vertical position.
Proceed as follows to operate the device in the vertical operating position:
► Disconnect the cables if required.
► Push the device onto the foot in the direction of the arrow.
► If necessary, reconnect any cables that were previously disconnected.
Fujitsu Technology Solutions
and
"Horizontal operating position", Page 10 -
"Vertical operating position",
English).
English - 9
51