Alarm; Motion; Cameras Menu; Settings - Night Owl F SERIES User Manual

7.1.3 Alarm

a. Motion: configure the motion alarm settings for your DVR system.
Channel: select the channel to configure motion alarm settings.
Enable: activate motion alarms.
Sensitivity: adjust the level of motion detection. A lower setting will require more
movement in the camera range to begin recording.
Buzzer: toggle between ON and OFF to enable an audible alert from the DVR.
Post Recording: set the amount of time to record after the motion is detected. You
can select between 30 and 300 seconds.
Area: clicking Setup will allow you to configure areas which will and will not
detect motion. Red boxes denote areas that will detect motion and uncolored
boxes show areas that will not. When finished, right click to go back to menu.
Show Message: check the tick box to enable the display of a red "M" on-screen
while in Live View mode. "M" means motion is occuring.
Send Email: check the tick box to send an email alert when motion is detected.
See section 7.1.2. for email setup and configuration.
Full Screen: when this tick box is checked, the selected channel will go to full
screen when motion is detected.
Record Channel: this option gives you the ability to start recording on the
channels you select/highlight as soon as motion has been detected on the Channel
selected above within the Channel field.
40 F DVR Series Users Manual

7.2 Cameras Menu

Adjust or modify individual camera settings connected to your DVR.

7.2.1 Settings

Channel: select the channel you want to configure a camera for.
Channel Name: create a name for the selected channel; this name will be
displayed on-screen during live view and playback.
Position: change the position of Channel Name while viewing in Live View. For
example U-L = Upper-Left; D-L= Down Left; U-R=Upper Right; D-R=Down Right
Color: click Setup to access a sub-menu to adjust the colors of the selected
channel. In this sub-menu you can adjust the Hue, Brightness, Contrast, and
Saturation of the image.
Covert: Enable or Disable the display of this channel. Enabling the Covert mode
will not affect the channel's recording functions; only block the channel while
viewing in live view mode.
Record Time: Enable or Disable the recording time display on-screen during
playback mode.
Show Time: Enable or Disable the on-screen timestamp during live view mode.
Chapter 7: Menus and Settings 41