Connecting To A Tv; Power - Night Owl F SERIES User Manual

Chapter 5: DVR Installation
5.1 Connecting to a TV (via HDMI)
1. Locate the included HDMI cable.
2. Plug one end of the cable into the HDMI port on the back of the DVR.
3. Connect the other end of the cable to an available HDMI input on your TV or
monitor.
24 F DVR Series Users Manual
4. Select the appropriate video input channel on your TV or monitor to view the
DVR.
If your TV does not have an HDMI port, you
will need to purchase a VGA or a BNC-to-RCA
video cable.
For a VGA connection, attach one end of the VGA cable to the
DVR VGA port and the other end to your TV VGA port.
For a BNC-to-RCA connection, attach the yellow RCA video
connector of the cable to a yellow Video Input port on your
TV. The opposite BNC video connector on the cable should
then connect to the Video Out (V-OUT) port on the back of
the DVR.

5.2 Power

1. Locate the labeled DVR power adapter; the camera power adapter and DVR
power adapter should never be interchanged.
Chapter 5: DVR Installation 25