Genie W96EBV User Manual page 7

• Connecting Low Voltage Power & Video Signal
The wiring harness has a BNC connector to output the video signal and the other
connector is used to input DC12V low voltage power – polarity conscious.
An adapter is provided to connect directly to bare cable ends.
• Adjusting the Camera Direction
The built-in 3 axis camera mechanism makes it very easy to rotate the camera in any
direction and direct the lens toward the target.
• A djusting the Viewing Angle
Use the supplied adjusting tool to alter the camera zoom and focus screws – these are
marked on the camera case.
Make sure the ring is firmly tightened before and after adjusting the lens.
6. Dimensions
OSD
Vandal Resistant Dome Camera with IR LED's
DC12V
VIDEO
7