Table of Contents
Advertisement
1. This product is patented for configuration, appearance and design; copying is not permitted.
2. If this product fails to operate normally contact your authorised distributor or service centre. Never
disassemble or modify the product in any way. Problems caused by disassembly, modification or
repair invalidates the product warranty.
3. Electromagnetic fields at specific frequencies may cause image interference.
4. Only use a standard regulated power adapter. Using any other adapter could result in fire, electric
shock or damage to the product.
5. Incorrectly connecting the power supply may result in fire, electric shock or damage to the product.
6. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal
heat generation or fire.
7. Securely plug the power cord into the power receptacle. A loose connection may result in fire.
8. When installing the camera on a wall or ceiling, fasten it safely and securely. A falling camera may
cause personal injury.
9. Do not place conductive objects (e.g. screwdrivers, coins etc.) on top of the camera.
10. Do not install the unit in humid, dusty locations.
11. If any unusual smell or smoke comes from the unit, please stop using the product. In such cases,
please immediately disconnect the power source and contact your local authorised distributor or
service centre.
1. Do not drop objects on the products or apply strong shocks to it. Keep it away from locations subject
to excessive vibration or magnetic-field interference.
2. Do not install in a location subject to high temperatures (over 122°F or +50℃), low temperatures
(below 14°F or -20℃) it may cause a fire.
3. If want to relocate the installed product, turn off the power before moving or reinstalling it.
4. Remove the power plug from the outlet if there is a lightning storm. Neglecting to do so may cause
fire or damage to the product.
5. Avoid a location which is exposed to direct sunlight, or near heat sources. Neglecting to do so may
cause fire.
6. Install in a well-ventilated location.
7. Avoid aiming the camera directly towards extremely bright objects such as the sun, as this may
damage the image sensor.
Warning
Cautions
Vandal Resistant Dome Camera with IR LED's
3
Advertisement
Table of Contents
