Specifications; Model Number; Engine; Fuel System - Exmark Metro HP Operator's Manual

PART NO. 1-413206
LOCATION: Top of Cutter Deck, Under
Center Belt Shield (36")
PART NO. 103-2244
LOCATION: LH Side of Console

2. SPECIFICATIONS

2.1 MODEL NUMBER:

Serial Nos. 320,000 & Higher: MHP3615KAC; MHP4815KAC

2.2 ENGINE

2.2.1 Engine Specifications: See your Engine Owner's Manual.
2.2.2 3600 RPM (No Load).

2.3 FUEL SYSTEM

2.3.1 Capacity: 5.0 gal. (18.9 L.)
2.3.2 Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries using
the research method, it should be a 90 octane minimum.
2.3.3 Fuel Filter: Replaceable in-line
2.3.4 Fuel Shut-Off Valve: 1/4 turn

2.4 SAFETY INTERLOCK SYSTEM

Operator must have transmission in neutral and PTO disengaged to start engine.
Release of OPC levers will cause the engine to stop if transmission is not in
neutral and/or PTO is engaged.

2.5 STEERING/BRAKE CONTROL:

Fingertip drive control levers provide independent speed control, braking, and
neutral to each drive wheel for moving, stopping, and power turning. Parking
brakes are engaged by locking drive control levers in the "brake" position.
PART NO. 1-413327
LOCATION: Top of Cutter Deck, Under
Belt Shield (48" & 52" Decks)
PART NO. 103-2245
LOCATION: RH Side of Console
- 8 -