Super Io Configuration - ECS BSWI-D User Manual

    

Super IO Configuration

Use this item to show the information of Super IO configuration.
Main Advanced
Super IO Configuration
Super IO Chip

Serial Port 1 Configuration
    
Serial Port 2 Configuration
    
Parallel Port Configuration
Super IO Chip (IT8625)
This item shows the information of the super IO chip.
Serial Port 1 Configuration
Scroll to this item and press <Enter> and view the following screen.
Main Advanced
Serial Port 1 Configuration
Serial Port
Device Settings
Change Settings
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Press <Esc> to return to the Super IO Configuration page.
38
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Chipset M.I.B X Boot Security Exit
IT8625
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Chipset M.I.B X Boot Security Exit
[Enabled]
IO=3F8h; IRQ=4;
[Auto]
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
BSWI-D USER MANUAL
Set Parameters of Serial Port
1 (COMA)

:Select Screen

:Select Item
Enter : Select
+/- :Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Enable or Disable Serial Port
(COM)

:Select Screen

:Select Item
Enter : Select
+/- :Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit