ECS BSWI-D User Manual page 44

Parallel Port Configuration
Scroll to this item and press <Enter> and view the following screen.
Main Advanced
Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
Parallel Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=378h; IRQ=5)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Device Mode (Standard Parallel...)
This item is used for Printer port mode selection, it can be set to Standard Parallel
Port Mode (SPP) or EPP Mode.
Press <Esc> to return to the Super IO Configuration page.
40
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Chipset M.I.B X Boot Security Exit
[Enabled]
IO=378h; IRQ=5;
[Auto]
[Standard Parallel...]
Version 2.17.1249. Copyright (C) 2015 American Megatrends, Inc.
BSWI-D USER MANUAL
Enable or Disable Parallel
Port (LPT/LPTE)

:Select Screen

:Select Item
Enter : Select
+/- :Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit