Sanyo PLC-WXE46A Service Manual page 16

Mechanical disassembly
3. Power, Line Filter, Ballast Board, thermal Switch (SW902), Fan (FN906) removal
1. Remove the Isolation sheet.
. Remove 4 screws A (T3x6) to remove the Power Board and  screws B (T3x6) to remove
SW90.
3. Remove 4 screws C (T3x6) to remove the Ballast Board.
4. Remove  screws D (T3x6) , screw E (T3x6) and  screws F (T3x6) to to remove the Power
Board Holder.
5. Remove screw G (T3x6) to remove the Line Filter Board and the Line Filter Board Holder.
6. Remove the fan (FN906).
7. Remove screw H (M3x8) to remove the Ballast socket.
(T3x6)x4
C
C
Ballast Board
Power Board
C
(T3x6)x
C
D
FN906
Isolation sheet
A
A
A (T3x6)x4
A
(T3x6)x
B
B
Thermal switch
(SW90)
D
Power Board Holder
(T3x6)
F
F
(T3x6)x (Black)
-16-
E (T3x6)
G (T3x6)
Line Filter
Board Holder
Line Filter Board
H (M3x8)
Ballast socket
Fig.3