Drive Enclosure; Figure 6.5 Front View Of A 2.5" Type Drive Enclosure; Figure 6.6 Rear View Of A 2.5" Type Drive Enclosure - Fujitsu ETERNUS DX500 S3 Overview

Chapter 6 Hardware Configurations
6.2

Drive Enclosure

6.2 Drive Enclosure
This section explains the main components in the drive enclosure.
The drive enclosure contains drives installed in the front, and I/O modules and power supply units in the rear.
Three types of drive enclosures are available; a 2.5" type, a 3.5" type, and a high-density type.
Drive enclosures can be added during system operation. When an error occurs, replacement operations can
be performed while the system is running.
■
External Views of a 2.5" Type Drive Enclosure
●
Front View

Figure 6.5 Front View of a 2.5" Type Drive Enclosure

1
1. 2.5" disk or 2.5" SSD
●
Rear View

Figure 6.6 Rear View of a 2.5" Type Drive Enclosure

1
3
1. I/O module (IOM#0)
2. I/O module (IOM#1)
3. Drive interface (IN) port
4. Drive interface (OUT) port
5. Power supply unit (PSU#0)
6. Power supply unit (PSU#1)
4
5
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Overview
Copyright 2015 FUJITSU LIMITED
2
3 4
6
75
P3AM-7702-14ENZ0