Chapter 6 Hardware Configurations; Controller Enclosure; Figure 6.1 Front View Of A Controller Enclosure (With A Front Cover); Figure 6.2 Front View Of A Controller Enclosure (Without A Front Cover) - Fujitsu ETERNUS DX500 S3 Overview

Chapter 6
Hardware Configurations
This chapter explains hardware configurations for the ETERNUS DX.
6.1

Controller Enclosure

This section explains the main components in the controller enclosure.
The controller enclosure contains an operation panel, battery units, and PCIe Flash Module (PFM) installed in
the front and controllers (CMs), host interfaces (CAs), and power supply units in the rear.
■
External Views of a Controller Enclosure
●
Front View

Figure 6.1 Front View of a Controller Enclosure (With a Front Cover)

Figure 6.2 Front View of a Controller Enclosure (Without a Front Cover)

7
6
5
4
1. Battery (BBU#0)
2. Battery (BBU#1)
3. Battery (BBU#2)
4. PCIe Flash Module (CM#0, PFM#0)
5. PCIe Flash Module (CM#0, PFM#1)
6. PCIe Flash Module (CM#1, PFM#0)
7. PCIe Flash Module (CM#1, PFM#1)
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Overview
Copyright 2015 FUJITSU LIMITED
69
3
2
1
P3AM-7702-14ENZ0