Keyless Entry; Obstacle Detection; Stopping The Liftgate Movement - Ford 2016 EXPEDITION Owner's Manual

E209084
Press and release the button in the rear
cargo area.

Stopping the Liftgate Movement

You can stop the liftgate movement by
doing any of the following:
• Pressing the liftgate control button.
• Pressing the liftgate button on the
remote control twice.
• Pressing the liftgate button on the
instrument panel.
• Activating the obstacle detection
feature.
Expedition (TB7) Canada/United States of America, enUSA, First Printing
Locks

Obstacle Detection

When Closing
The system stops when it detects an
obstacle. Three chimes sound and the
system reverses to open. Once you remove
the obstacle, you can power close the
liftgate.
Note: Entering your vehicle while the
liftgate is closing can cause your vehicle to
bounce and activate obstacle detection. To
prevent this, let the power liftgate close
completely before you enter your vehicle.
Before driving off, check the instrument
cluster for a liftgate or door ajar message or
warning indicator. Failure to do this could
result in unintentionally leaving the liftgate
open while driving.
When Opening
The system stops when it detects an
obstacle and two short tones sound.
Remove the obstacle to operate the
liftgate.

KEYLESS ENTRY

SECURICODE
KEYPAD
The keypad is located near the driver
window.
Note: If you enter your entry code too fast
on the keypad, the unlock function may not
work. Re-enter your entry code more slowly.
I n f o r ma t i o n P r o v i d e d b y :
E163050
59
KEYLESS ENTRY