Memory Function; Saving A Preset Position - Ford 2016 EXPEDITION Owner's Manual

2. Continue pressing the control until it
reaches the end of the seat track.
3. Continue pressing the control for about
two seconds. You will feel the seat
bounce back slightly.
Power Lumbar
(If Equipped)
E164101
The control is located on the outboard side
of the seat. Press the forward or rearward
side of the control for more or less support.

MEMORY FUNCTION

WARNINGS
Before activating the seat memory,
make sure that the area immediately
surrounding the seat is clear of
obstructions and that all occupants are
clear of moving parts.
Do not use the memory function
when your vehicle is moving.
This feature automatically recalls the
position of the following:
• Driver seat.
• Power mirrors.
• Power steering column.
• Optional power adjustable foot pedals.
The memory control is located on the left
side of the driver seat.
Expedition (TB7) Canada/United States of America, enUSA, First Printing
Seats
E205043

Saving a PreSet Position

1.
2. Adjust the memory features to your
3. Press and hold the desired preset
You can save up to two preset memory
positions.
You can save a memory preset at any time.
Recalling a PreSet Position
Switch the ignition on.
Press and release the preset button
(If Equipped)
associated with your desired driving
position. The memory features will move
to the position stored for that preset.
Note: You can only recall preset memory
position when you switch the ignition off, or
when you place the transmission in park (P)
or neutral (N) if you switch the ignition on.
Note: If you enable Easy Exit, a memory
recall when the ignition is off will move to
the easy exit position.
I n f o r ma t i o n P r o v i d e d b y :
126
1
Switch the ignition on.
desired position.
button until you hear a single tone.
2