Table of Contents
Advertisement
4.
Operation
NOTE: The control button described in this section is mainly on the
remote control unless specified otherwise.
4.1.
Change Aspect Ratio
You can change the aspect ratio to suit the video source. Each video
source has its available aspect ratios..
The aspect ratios depend on the video source:
1. Press [
] FORMAT button.
2. Press [ ] or [ ] button to choose an aspect ratio, then press
[
] button.
Options: Auto, Letterbox, Full Screen, Native, 4:3
4.2.
Play Multimedia Files
You can play videos, photos, and music on your display from:
•
Your computer connected to your network.
•
A USB device connected to the display.
•
A device connected wirelessly to a router connected to the display
Supported file system:
•
FAT32
Supported file format:
•
Music: MP3, WMA, M4A, AAC, AC3
•
Movie: AVI, MP4, MOV, MPG/MPEG
•
Photo: JPEG, BMP, GIF
4.2.1. Play files from computer
1. Connect your display to the network (see page 12)
2. Confirm that the computer, hub or router, and display are turned on
and connected.
3. Switch on media sharing on your computer using the media server.
For more information on how to set up the media server, refer to the
website of the media server.
4. Press the SOURCE button on the remote and Select Network.
5. Select a file from the content browser, then press OK button to start
playing.
6. When adding new multimedia files, exit the current file and return to
the upper folder.
7. Use the remote control to control the media files on the display.
Tips:
•
Select the top bar to filter your files by type.
•
Select [Sort] to arrange the files by album name, artist, or other
fields.
•
To clear the list of offline media servers, press
button, then select [Clear offline servers] and press OK button.
4.2.2. Play multimedia files from USB device
This display can play music, movie, or photo files from your USB device.
1. Connect your USB device to the USB port on this display.
2. Press
3. The connected USB device is detected automatically for all its
playable files, which will be automatically sorted into 3 types:
,
, and
4. Press the
BACK button to go up to the top layer in the screen.
Press
button to select the file type. Press
its play list.
5. Select the file you want. Press
6. Follow the on-screen instruction to control the play option.
7. Press the PLAY buttons ( H F G I J ) to control playing.
Caution:
•
The manufacturer is not responsible if the USB device is not
supported, nor is it responsible for damage to or loss of data in the
device.
•
Do not overload the USB port. If you connect a USB storage
device that consumes more than 500mA power, make sure that it is
connected to its own external power supply.
NOTE: USB content will auto play for scheduled events only (see page
18 for Scheduling). If a display is powered down and powered
up manually, the last input used prior to the USB source will be
automatically detected at start up. If no input other than USB
has been used, the display will detect the HDMI source.
13
Simplicity Series
button, select USB, then press
.
button to enter
button to start playing.
USB
button.
Advertisement
Table of Contents
Troubleshooting
