External Tool Parts View; Specifications; Safety Guidelines - DeWalt D51825-XE Instruction Manual

FIG. 1
EXTERNAL TOOL PARTS
TRIGGER
RAFTER HOOK
MAGAZINE
PUSHER
EXHAUST
DEPTH
SETTING
CONTACT TRIP
Height
Width
Length
Weight
Magazine Angle
Recommended Operating Pressure
Air consumption per
100 cycles
Air consumption per
single shoot
Loading capacity
Nail Lengths
Shank Diameters
Nail Stick Angles
Shank Types
1
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.
TOOL SPECIFICATIONS
D51825-XE Clipped Head
14-1/4" (36.4 cm)
6-1/2" (16.4 cm)
19" (48.2 cm)
7.8 lb (3.54 kg)
31˚
70 - 120 psig (4.9 to 8.3 bar)
5.6 cfm @ 100 psi
158.6 l/m @ 6.9 bar
.056 cfm @ 100 psi
1.586 l/m @ 6.9 bar
Up to 80 Nails
NAIL SPECIFICATIONS
D51825-XE Clipped Head
2" - 3-1/2" (50 mm - 90 mm)
.113" - .131" (2.9 mm - 3.3 mm)
30˚ - 34˚
Smooth, Ring, Screw
D51850-XE Full Round Head
14-1/4" (36.4 cm)
7-1/8" (18.0 cm)
21-1/4" (53.9 cm)
7.9 lb (3.58 kg)
20˚
70 - 120 psig (4.9 to 8.3 bar)
5.6 cfm @ 100 psi
158.6 l/m @ 6.9 bar
.056 cfm @ 100 psi
1.586 l/m @ 6.9 bar
Up to 65 Nails
D51850-XE Full Round Head
2" - 3-1/2" (50 mm - 90 mm)
.113" - .148" (2.9 mm - 3.8 mm)
20˚ - 22˚
Smooth, Ring, Screw