Removing The Front Wheel - Husqvarna 2013 CR 125 Owner's Manual

REMOVING THE FRONT WHEEL

Set a stand or a block under the engine and see that the front
wheel is lifted from the ground. Loosen the bolts (1) holding the
wheel axle (2) to the front
fork stanchions.
Hold the head of the wheel axle (2) in place, unscrew the bolt
(3) on the opposite side; draw the wheel axle out.
NOTES
Do not operate the front brake lever when the wheel has been
removed; this causes the caliper piston to move outwards. After
removal, lay down the wheel with brake disc on top.
2
SPECIFICATIONS - OPERATION - MAINTENANCE
1
1
3
EN - 35