Table of Contents
Advertisement
HANDLEBAR COMMUTATOR (WR)
The left commutator has the following controls:
1) Engine stop button (
)
2) HI = (
) Selection control High beam
LO = (
) Selection control of Low beam
3) TURN
= Activation of left turn indicators (self cancelling)
= Activation of right turn indicators (self cancelling)
To deactivate the indicator, press the control lever after its re-
turning to center.
4) HORN = (
) Warning horn
5) LIGHTS
= Lighting control of lowbeams and high beam.
= Lighting control of position lights.
= Off
WR
5
4
3
SPECIFICATIONS - OPERATION - MAINTENANCE
ENGINE STOP BUTTON (CR - WR USA)
On the left side of the handlebar, near the clutch control, is lo-
cated the engine stop button (1).
CLUTCH CONTROL
The clutch lever (2) is located on the left-hand side of the han-
dlebar and is protected against dirt filtering in.
The position of the clutch control on handlebar can be adjusted
by loosening the retaining screws (C).
1
CAUTION
Do not forget to tighten the screws (C) after
the adjustment.
2
1
C
2
EN - 15
Hide quick links:
Advertisement
Table of Contents
