Adjusting And Setting The Tv Using The Menu; Adjusting The Picture And Sound - Sony KP-46S3K Operating Instructions Manual

Adjusting and Setting the TV Using
the Menu
PICTURE
SOUND
1
2
1 3
4 5 6
8 9
7
0 C
2
PROGR
+ +
1
_ _
SAT 1
+
MENU
_
OK
VTR 1-2-3 MDP
3
+
PROGR
_
4
RM-831
5
Effect of each control
If you have made a
mistake
≅
Press to go back to
the previous position.
To go back to the main
menu
≅
Keep pressing .
Note
HUE is only available for
NTSC colour systems.
Note on LINE OUT
The audio level and the
dual sound mode output
from the > jack on the
rear correspond to the
Headphone VOLUME
and DUAL SOUND
settings.
When watching a
video input picture
You can select DUAL
SOUND to change the
sound.
*When receiving a NICAM programme
NICAM stereo/monaural
NICAM bilingual

Adjusting the Picture and Sound

Although the picture and sound are adjusted at the factory, you
can adjust them to suit your own taste. You can also select dual
sound (bilingual) programmes when available or adjust the sound
for listening with the headphones.
Press (for picture) or (for sound) on the remote Commander.
or
Press MENU and select "PICTURE" or "SOUND," then press OK.
The PICTURE ADJUSTMENT or SOUND ADJUSTMENT menu
appears.
(See Fig. 15 or Fig. 16.)
Using >+ or ?–, select the item you want to adjust and press OK.
To move up/down:
From . position, press ?– to move down.
From > position, press >+ to move up.
. means next page.
> means previous page.
Adjust the setting with >+ or ?– and press OK.
For the effect of each control, see the table below.
Repeat steps 2 and 3 to adjust other items.
Press MENU to return to TV picture.
PICTURE ADJUSTMENT
> (contrast)
¨ (brightness)
¯ (colour)
(hue)
Π(sharpness)
RESET
NOISE REDUCE
DIGITAL MODE
SOUND ADJUSTMENT
( (Treble)
,(Bass)
Β ( B a l a n c e )
RESET
SPACE SOUND
LOUDNESS
DUAL SOUND*
2 (Headphones)
STEREO NICAM
NICAM A
Effect
Less More
Darker Brighter
Less More
Greenish Reddish
Softer Sharper
Resets picture to the factory preset levels.
OFF: Normal ON: When reducing the picture noise
1: Line Flicker reduction on.
2: Line Flicker reduction off.
Effect
Less More
Less More
More left More right
Resets sound to the factory preset levels.
OFF: Normal ON: Obtain acoustic sound effect.
OFF: Normal ON: When listening to low volume sound.
A: left channel B: right channel Stereo mono
STEREO ˜ MONO
The selected mode of the A-µ-B Indicator on the TV lights up.
L e s s Á
MONO
NICAM B MONO
PICTURE ADJUSTMENT
RESET
SELECT AND PRESS OK
PICTURE ADJUSTMENT
NOISE REDUCE : OFF
DIGITAL MODE : 1
SELECT AND PRESS OK
Fig. 15
SOUND ADJUSTMENT
RESET
SELECT AND PRESS OK
SOUND ADJUSTMENT
SPACE SOUND : ON
LOUDNESS : OFF
DUAL SOUND : STEREO NICAM
SELECT AND PRESS OK
Fig. 16
15
GB