Step 4 : Setting Up The Projection Tv Automatically (Auto Set Up) - Sony KP-53S65 Service Manual

Step 4: Setting up
the projection TV
automatically
(AUTO SET UP)
You can set up your projection TV easily by using the
AUTO SET UP feature. It presets all the receivable
channels, adjusts the convergence and changes the on-
screen menu language. To set up the projection TV
manually, see "Adjusting convergence" (page 16),
"Setting cable TV on or off" (page 17), "Presetting
channels" (page 18) and "Changing the menu
language" (page 18).
If the projection TV is set to a video input, you cannot
perform AUTO SET UP. Press TV/VIDEO so that a
channel number appears.
(Front of projection TV)
TIMER/
SETUP TV/VIDEO – VOLUME + – CHANNEL + POWER STEREO STAND BY
Before you start using AUTO SET UP, be sure to
connect the antenna or cable to the projection
TV (see page 6).
1
Press POWER to turn the projection TV on.
POWER
2
Press SETUP on the front of the projection
TV.
AUTO SET UP screen appears.
SETUP
[CH ] +
ENGLISH :
ESPAÑOL : [CH ] –
[VOL ] +
FRANÇAIS :
AUTO SET UP : [VOL ] –
DEMO : [TV/VIDEO]
Press [SET UP] to exit.
14 -EN Getting Started
3
Press CHANNEL +/– or VOLUME + to select
the on-screen menu language.
If you prefer Spanish or French to English, you can
change the on-screen menu language.
– CHANNEL + – VOLUME +
or
All of the menus will be set to the factory preset
condition in the selected language.
4
Press VOLUME – to start AUTO SET UP.
– VOLUME +
CONT I NUE TO
AUTO PROGRAM?
[ ]
YES : CH+
NO : [ CH– ]
5
Press CHANNEL + to preset channels.
– CHANNEL +
AUTO PROGRAM
"AUTO PROGRAM" appears on the screen and the
TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
following menu appears. If the projection TV
receives cable TV channels, CABLE is set to ON
automatically.
CONT I NUE TO
CONVERGENCE?
YES : CH+ [ ]
NO : [ CH– ]
To exit AUTO PROGRAM
Press any button.
6
Adjust convergence.
(1) Press CHANNEL +.
The CONVERGENCE adjustment screen
appears.
R
– CHANNEL +
CONVERGENCE : RED
G
[ ]
CH+
B
[ VOL – ] [ VOL + ]
[ ]
CH–
B
RED / BLUE : TV/VIDEO [ ]
E x i t : SET UP [ ]
G
R
R=Red
G=Green
B=Blue
(2) Press TV/VIDEO to select RED or BLUE.
TV/VIDEO
CONVERGENCE : RED
[ ]
CH+
[ VOL – ] [ VOL + ]
[ ]
CH–
[ ]
RED / BLUE : TV/VIDEO
E x i t : SET UP [ ]
(3) Using CHANNEL +/– or VOLUME +/–, move
the line until it converges with the center green
line.
B
– VOLUME + – CHANNEL + CONVERGENCE : RED
G+R
[ ]
CH+
[ VOL – ] [ VOL + ]
[ ]
CH–
[ ]
RED / BLUE : TV/VIDEO
B
E x i t : SET UP [ ]
G+R
To move horizontal line up/down, press CHANNEL
+/–.
To move vertical line right/left, press VOLUME +/–.
(4) Repeat steps (2) and (3) to adjust the other lines
until all three lines converge and are seen as a
white cross.
CONVERGENCE : BLUE
[ ]
CH+
[ VOL – ] [ VOL + ]
[ CH– ]
: TV/VIDEO [ ]
RED / BLUE
White cross
E x i t : SET UP [ ]
Note
• Using the AUX connector, press TV (black button) first and
make sure that "AUX" is displayed beside the channel number
on the screen. Then follow the steps 2 to 6 above to perform
AUTO SET UP.
To preview the main functions (DEMO)
Press TV/VIDEO on the projection TV in step 4. The
functions and menus are displayed one by one.
To exit DEMO
Press any button.
Erasing or adding channels
After AUTO SET UP, you can erase unnecessary
channels or add the channels you want. Preset channels
during the day rather than late at night, when some
channels may not be broadcasting.
TV (FUNCTION)
1 2 3
0 – 9 buttons
4 5 6
7 8 9
ENTER
0
>
.
MENU
CH +/–
1
Press TV (FUNCTION).
FUNCTION
TV
2
Press MENU.
The main menu appears.
VIDEO
MENU MODE : STANDARD
PICTURE
HUE
COLOR
BRIGHTNESS
SHARPNESS
TRINITONE : HIGH
MENU
CC
Exit
Use MENU
3
Press V or v to select , and press .
The SET UP menu appears.
SET UP
CHANNEL ERASE/ADD
CHANNEL CAPTION
CHANNEL BLOCK
FAVORITE CHANNEL
CABLE : ON
AUTO PROGRAM
VIDEO LABEL
LANGUAGE : ENGLISH
CC CONVERGENCE
MENU
Use Exit
MENU
15 -EN
Getting Started
EN