Download Print this page

Cable Connections - Pulse MX102 User Manual

Advertisement

SPECIFICATION TABLE
Power Transformer
Primary 230V AC / 50Hz
Secondary 18.5V / 350mA
Mixer spec
130dB Range for 24-bit, 192 kHz sampling rate inputs
60dB Gain range
Total Harmonic Distortion: 0.0007% (20Hz to 20 kHz)
24 Bit digital stereo FX processor
3 Band equaliser
Balanced line inputs with +4/-10 level section
FX send control per channel
Main mix outputs plus separate control room, phones and stereo TAPE output
+48V Phantom power

Cable connections

You are going to use a large amount of cable that run to and fro from your
console and have different plugs connected. When running your cables please
make sure all cables are out of the way of where people may be walking.
Damaged cables or your console being pulled off your workstation by cables
being tripped over may damage the console. Here are diagrams on how to
wire different plug connectors. These are for illustration purposes only, if you
have any doubt about how to wire your console do not attempt to install it
yourself but seek out a qualified technician.
9

Advertisement

loading

This manual is also suitable for:

Mx1202