Page 1
CMX-DSP Compact Mixers CMX4-DSP, CMX8-DSP, CMX12-DSP www.pulse-audio.co.uk | CMX-DSP Series User Manual...
Page 2
Introduction Thank you for choosing a Pulse CMX-DSP series mixer. This product has been designed to offer reliable, high quality mixing for stage and/or studio applications with unfailing consistency. In order to gain the best results from this equipment and avoid damage through misuse, please read and follow these instructions and retain for future reference.
27. Master AUX send level 13. Channel Pan or balance control 28. DSP effect level control 14. Mid frequency EQ control 29. Master Effect send level (internal or output) 15. Low frequency EQ control 30. Master fader www.pulse-audio.co.uk | CMX-DSP Series User Manual...
6.3mm jack AUX output can be connected to monitoring or external processing equipment if required. Individual levels can be adjusted to the AUX output via the individual channel AUX controls. Overall auxiliary send level is governed by the master AUX control. www.pulse-audio.co.uk | CMX-DSP Series User Manual...
Use the AUX control to feed the correct amount of the channel signal to the AUX output. This routing is “Pre-fader” and is independent from the channel fader setting. www.pulse-audio.co.uk | CMX-DSP Series User Manual...
When a USB pen drive or SD card with such files on is connected via the rear panel, the player recognizes this and automatically begins playback through the stereo channel. Transport buttons are situated next to the output LEDs on the top panel to control USB/SD playback as shown below… Previous/Back Play/Pause Next/Forward www.pulse-audio.co.uk | CMX-DSP Series User Manual...